在面粉石磨機的生產過程中，物料需要經過很多道工序，但是這么的工序中，有些工作人員由于對細節部位把控不夠，所以容易忽略一些細節部位，影響設備的正常生產。那么在石磨面粉機械的生產中有哪些容易忽視的細節呢？

In the production process of flour stone mill, materials need to go through many processes, but in such processes, some staff are easy to ignore some detail parts because they do not control the detail parts enough, which affects the normal production of the equipment. So what are the details that are easy to ignore in the production of stone flour machinery?

配麥?zhǔn)侨詣?dòng)石磨面粉機生產加工前的第道工序，合理的配麥，起到資源有效利用的作用，避免小麥出現浪費的現象。合理的配麥，還有助于面粉質量的穩定和生產效率的提高。合理的對小麥進行搭配，有助于生產過程的順利進行，從而提高全自動石磨面粉機的加工質量，這也是配麥這個加工細節的重要意義。

Wheat blending is the first process before the production and processing of automatic stone mill flour machine. Reasonable wheat blending plays a role in the effective utilization of resources and avoids the waste of wheat. Reasonable wheat blending also contributes to the stability of flour quality and the improvement of production efficiency. Reasonable collocation of wheat is conducive to the smooth progress of the production process, so as to improve the processing quality of the automatic stone mill flour machine, which is also of great significance to the processing details of wheat blending.

控制箱是石磨面粉機的控制設備，操作的時候有定風險。位置過低，小孩輕易能碰到控制箱，容易發生事故，位置太高又操作不便?？刂葡湓谶x擇位置的時候，定要選擇定的高度和合適的位置。

The control box is the control equipment of the stone flour mill, which has certain risks during operation. The position is too low. Children can easily touch the control box, which is prone to accidents. The position is too high and inconvenient to operate. When selecting the position of the control box, be sure to select the fixed height and appropriate position.

要注意的是石磨面粉機械磨輥間隙問題，具體的調整步驟是合閘、拉近外螺母，壓縮調整彈簧，保證兩個彈簧的壓力一致。目測或借助工具檢測間隙是否一致。大方向上調整好了，接下來就是細節上的微調，向均勻靠攏。

The first thing to pay attention to is the gap between the grinding rollers of the stone mill flour machinery. The specific adjustment steps are closing, closing the outer nut, compressing the adjustment spring to ensure that the pressure of the two springs is the same. Check whether the clearance is consistent by visual inspection or with the help of professional tools. After the general direction is adjusted, the next step is to fine tune the details and move closer to the uniform direction.

調緊軋距，轉動三角皮帶，觀察紙條被磨輥軋的痕跡是否均勻一致。如果痕跡不均勻，可調節拉桿上的螺母，使慢輥與快輥兩端平行。經上述初調和細調后，還要在石磨面粉機械工作檢查研磨后物料的破碎是否均勻；如果還不均勻，要通過調節拉桿外端螺母來調整彈簧的壓力。

Tighten the rolling distance, rotate the V-belt, and observe whether the marks of the paper strip rolled by the grinding roll are uniform. If the marks are uneven, adjust the nut on the pull rod to make the slow roll parallel to the two ends of the fast roll. After the above initial and fine adjustment, it is also necessary to work in the stone mill flour machinery to check whether the crushed materials are uniform after grinding; If it is not uniform, adjust the spring pressure by adjusting the nut at the outer end of the pull rod.

石磨面粉機械安裝好之后，調整的順序要先從磨輯開始，這也是加工面粉的主要的部件。兩個輻之間的距離是決定面粉粗細的重要因素，因此，調整對輪之間的距離非常重要。其次，還要調整球形螺絲旁邊的偏心套，需要把平板的四個角壓平，然后固定偏心套，這時的偏心套也是角度剛好的。把判斷距離的厚薄規放在兩個輻之間，把它們之間的距離調整到合適狀態。

After the installation of stone flour machinery, the order of adjustment should start with grinding, which is also the main component of flour processing. The distance between the two spokes is an important factor in determining the thickness of flour. Therefore, it is very important to adjust the distance between the opposite wheels. Secondly, the eccentric sleeve next to the spherical screw shall be adjusted. The four corners of the flat plate shall be flattened, and then the eccentric sleeve shall be fixed. At this time, the eccentric sleeve is also at the right angle. Put the thickness gauge for judging the distance between the two spokes and adjust the distance between them to an appropriate state.

如今經過科技人員不斷的嘗試和調整之后，新型的、更加有效的面粉機出世了。它能夠?qū)崿F(xiàn)并肩雜徹底與凈糧分離，為后道加工工序奠定了良好的質量基礎，從而能夠保證原糧的清理效果以及后路的效果明顯提高?？傮w上，石磨面粉加工設備的清糧工藝實現了無論是從效率、產量還是效果上，都有了明顯的提高，也保證了設備的加工質量和效益。

Now, after continuous attempts and adjustments by scientific and technological personnel, a new and more effective flour machine has been born. It can realize the complete separation of raw grain and clean grain, and lay a good quality foundation for the subsequent processing process, so as to ensure that the cleaning effect of raw grain and the effect of the back road can be significantly improved. In general, the grain cleaning process of stone mill flour processing equipment has been significantly improved in terms of efficiency, yield and effect, and also ensured the processing quality and benefit of the equipment.