I believe that everyone is no stranger to the stone flour mill in daily life, so how to improve the use efficiency of the stone flour mill has become a matter of concern. Today, Zhongyang stone mill electric appliance will give you a brief analysis of the best ways to improve the use efficiency of stone mill flour mill:

1、磨損速度快是由于新磨粉機零部件加工、裝配和調整等因素的影響，其摩擦表面粗糙，配合面接觸面積較小，表面的承壓狀況不均。磨粉機在運行過程中，零件表面的凹凸部分相互嵌合摩擦，磨落下來的金屬碎屑，又作為磨料，繼續參與摩擦，更加速了零件配合表面的磨損。因此，磨合期內容易造成零部件的磨損，磨損速度快。這時，如果超負荷作業，則可能導致零部件的損壞，產生早期故障；

1. The fast wear speed is due to the influence of processing, assembly and adjustment of parts of the new mill. Its friction surface is rough, the contact area of the mating surface is small, and the pressure bearing condition of the surface is uneven. During the operation of the pulverizer, the concave convex parts of the part surface are embedded and rubbed with each other, and the metal debris ground down continues to participate in the friction as abrasive, which further accelerates the wear of the part mating surface. Therefore, during the running in period, it is easy to cause the wear of parts and components, and the wear speed is fast. At this time, overload operation may lead to damage of parts and early failure;

2、發生松動新加工裝配的零部件，存在著幾何形狀和配合尺寸的偏差，在使用初期，由于受到?jīng)_擊、振動等交變負荷，石磨面粉機以及受熱、變形等因素的影響，加上磨損過快等原因，容易使原來緊固的零部件產生松動；

2. The newly processed and assembled parts are subject to geometric shape and fit size deviation. At the initial stage of use, due to the impact, vibration and other alternating loads, the influence of stone mill flour mill, heating, deformation and other factors, coupled with rapid wear and other reasons, it is easy to loosen the originally fastened parts;

3、潤滑不好由于新裝配的零部件的配合間隙較小，并且由于裝配等原因，很難保證配合間隙的均勻性，潤滑油不易在摩擦表面形成均勻的油膜，以阻止磨損。從而降低潤滑效能，造成機件的早期異常磨損。嚴重時會造成精 密配合的摩擦表面劃傷或咬合現象，導致故障的發生；

3. The lubrication is not good. Due to the small fit clearance of newly assembled parts, and due to assembly and other reasons, it is difficult to ensure the uniformity of fit clearance, and the lubricating oil is not easy to form a uniform oil film on the friction surface to prevent wear. So as to reduce the lubrication efficiency and cause early abnormal wear of parts. If it is serious, it will cause scratch or bite on the friction surface of precision fit, resulting in failure;

4、石磨面粉機發生滲漏現象由于機件的松動、振動和機器受熱的影響，機器的密封面以及管接頭等處，會出現滲漏現象；部分鑄造、加工等缺 陷，在裝配調試時難以發現，但由于作業過程中的振動、沖擊作用，這種缺 陷就被暴露出來，表現為漏油。因此，磨合期容易出現滲漏現象；

4. Leakage occurs in the stone mill flour mill. Due to the loose parts, vibration and heating of the machine, leakage will occur on the sealing surface and pipe joints of the machine; Some casting, processing and other defects are difficult to find during assembly and commissioning, but due to the vibration and impact during operation, such defects are exposed as oil leakage. Therefore, leakage is easy to occur during running in period;

5、操作失誤多由于對機器的結構、性能的了解不夠，容易因操作失誤引起故障，甚引起機械事故。

5. Most of the operation errors are due to insufficient understanding of the structure and performance of the machine, which is easy to cause faults and even mechanical accidents.

大家在使用石磨面粉機的同時要注意以上幾點，提高其使用效率，延長使用壽命。

While using the stone flour mill, we should pay attention to the above points to improve its use efficiency and prolong its service life.